Commercial Door Exit Devices

The TH1100EDTBAR “touch bar” style exit devices are suitable for all doors (aluminum, hollow metal, or wood) where there is no projection on the face. Manufactured of extruded anodized aluminum, the TH1100EDTBAR is durable enough for the most demanding applications. A rim cylinder is included, and the EDTBAR can also be used in conjunction with any of the exit device trims listed below.

EDTBAR

TH1100EDTBARDU

SPECIFICATIONS:

•MATERIAL: Extruded anodized aluminum push bar,
stainless steel springs
• LATCH: Stainless Steel, 3/4” throw - 5/8” deadlatch
• BACKSET: 23/4” Covers 161 prep, includes latch & strike filler plates
• STRIKE: Surface mounted for 5/8” stop with shim
• PROJECTION: 21/2” - 17/8” dogged
• STILE: 41/4” minimum
• HANDING: Reversible, non-handed
• DOOR THICKNESS: 13/4” standard
• DOOR WIDTH: 36”, can be field sized to 30”
• MOUNTING HEIGHT: Recommended installation at 41"
from finished floor to center line of push rail.
• FASTENERS: Furnished with sheet metal and machine screws
• CYLINDER: Rim included, all key trims cylinder included except PLED
• DOGGING: 1/2 turn hex key
• FIRE RATED: Available - please specify • FINISHES: Aluminum, Duronotic, and Stainless Steel

The TH1100-ED “crash bar” style exit devices are suitable for narrow, medium or wide stile aluminum and hollow metal doors. It is non-handed and reversible with a contoured cross bar that will
fit doors up to 42” wide and can be field sized to accommodate narrow doors.

TH1100-EDRHDU

TH1100-EDRH-AL

Specifications
• MATERIAL: Contoured anodized aluminum cross bar,
stainless steel springs
• LATCH CASE: 11/4” wide x 71/4” long with 1/2” stainless throw
• BACKSET: 15/32” from edge of door to center line of device
• STRIKE: Rim mounted roller strike with shim
• PROJECTION: 43/4”
• STILE: 17/8” minimum
• HANDING: Handed, please specify RH or LH
• DOOR THICKNESS: 13/4” standard
• DOOR WIDTH: Up to 42”
• MOUNTING HEIGHT: Recommended installation at 3913/32" from
floor to center line of latch or strike assemblies
• FASTENERS: Furnished with sheet metal, machine screws and
shoulder mounting studs with set screws
• CYLINDER: Accepts rim cylinder only
• DOGGING: Inside - push up dog pin rotate with screwdriver,
Outside - by key cylinder
• FINISHES: Aluminum and Duronotic

The TH1100EDSV Surface Vertical Rod panic device is the perfect choice for double doors without mullions. Reversible for right or left hand doors, they are ideal for new construction or renovations. Our EDSV panics can be used in conjunction with any of our exit device trims listed below.

TH1100-CVR-DU

TH1100-CVR-AL

TH1100EDSVTBARA

Specifications
• MATERIAL: Extruded anodized aluminum push bar,
stainless steel springs
• LATCH: Top pullman type, Bottom bolt assembly
• DOOR HEIGHT: 7’ standard
• BACKSET: 23/4” on 41/2” minimum stile width - if less than
41/2" backset becomes half of the exposed stile width
• STRIKE: Top - surface mounted, Bottom - flat mortise or into
threshold, vertical/rim application use DBLST double dr. strike
• PROJECTION: 21/2” - 17/8” dogged
• STILE: 41/2” minimum
• HANDING: Reversible, non-handed
• DOOR THICKNESS: 13/4” standard
• DOOR WIDTH: 36”, can be field sized to 30”
• MOUNTING HEIGHT: Recommended installation at 41" from
finished floor to center line of push rail.
• FASTENERS: Furnished with sheet metal and machine screws
• CYLINDER: Accepts rim, all trims Schlage “C” keyway
• DOGGING: 1/2 turn hex key
• FIRE RATED: Available - please specify
• FINISHES: Aluminum, Duronotic, and Stainless Steel